What is installation? Types of computer installation and their description. How to install Windows operating systems using the WinNTSetup program Working with the WinNTSetup program

Instructions

Almost any computer program requires installation. Programs can be installed either from a disk, a flash drive, or from the hard drive itself. Insert the disc containing the corresponding program into the DVD/CD ROM. Wait a couple of seconds until the disk in the drive spins up and a menu appears that will allow you to install the program. The menu that appears on the screen is called “Program Installation Wizard”.

In the first installation window you will see a short message that needs to be installed. Three commands will be displayed below: “Back”, “Next” “Cancel”. Click Next. In the next window, information about the licensing of the program and the rules for its use will appear. Read, check the box next to “I agree to the terms of use of the product” and click “Next”.

Then a window will appear where you need to select the folder where the program will be installed. There is no need to change anything here, since it is recommended to install programs in the folder suggested by the “Installation Wizard”. Just click "Next". Be sure to wait until the program installation process completes. Once the installation is complete, you will likely be prompted to restart your computer. Left-click on the “Restart computer now” command. After restarting the computer, the program will be completely ready to work.

There are situations when the program is on a flash drive. In such cases, the “installation wizard” must be launched manually. To do this, open the flash drive by connecting it to your computer. Next, open the folder with the desired program, find the file “AutoRun.exe”. Open it. The “Program Installation Wizard” will launch. Further actions are similar to those described above.

The task of automating the installation of the Windows XP operating system may be caused by the need for periodic reinstallation for various reasons. In fact, the whole operation comes down to creating a special file containing answers to system requests. The creation of such a file is provided by the developers, and the creation tool is the SetupMgr.exe application.

Instructions

Insert the Windows XP installation disk into the drive and identify a folder named Support Tools. Expand the folder and unzip the Deploy.cab archive from the archive you are using. Run the specialized utility setupmgr.exe to proceed to creating the system response file Unattend.txt.

Skip the Windows Setup Manager application window by clicking Next and check the New box in the Answer File section of the dialog box. Confirm your choice by clicking the Next button and apply the Automatic installation checkbox in the Installation type group in the new manager dialog box. Proceed to the next dialog box by clicking the “Next” button and check the box for the version of the Windows XP operating system you are using. Please note that this automated installation procedure is only possible on Windows 200 and XP. Authorize the selection of the OS version by clicking the “Next” button and check the box for the desired automatic installation method. Confirm your choice by clicking the “Next” button and check the box for the desired location of the operating system distribution files. Authorize the application of the changes made by clicking the “Next” button.

There are words that have more than one meaning. For example, what is the word installation? What exactly does it mean? Sometimes we hear that somewhere there was an exhibition at which the installations of such and such an artist were presented, and then, when we look at the computer, we see the inscription on the screen “Installing the program.” We call a professional at home to replace the plumbing and again hear from him the mysterious word installation; We are looking for work on the Internet and unexpectedly come across such a field of activity as installation and service... Well, my head is spinning from this universal word! Meanwhile, everything is simple and clear if you know its meaning.

Light installations

Recently, light installations have become especially popular all over the world. Such unusual art objects are located in many capitals and large cities of the planet.

Glowing objects of a wide variety of shapes and colors give city streets and squares a fantastic festive look. Apparently this art form has a great future.

One of the most universal utilities is WinNTSetup. It can play an important role in situations where there is a need to install one of the latest versions of Windows operating systems on any computer device. With the help of this program it is possible to carry out such a procedure without difficulty.

The utility will be an indispensable assistant in many other situations. It is used to solve many problems. It will be useful to any user who is interested in computers. WinNTSetup does not require installation and can be downloaded to your computer device absolutely free of charge.

You can spend a lot of time figuring out the capabilities of this utility. Now we will talk about how to install Windows 10 using it.

How to install the Windows 10 operating system using the WinNTSetup program

In order to download this utility to your computer device, you can follow the link http://www.winntsetup.com/?page_id=5 to the official Internet resource and click on Get WinNTSetup.

In the download window, click on WinNTSetup3.zip. WinZip file.

On the page that opens you need to select WinNTSetup3.

This utility will initially look like an archived file. It is necessary to carry out the unzipping procedure.

If the computer device has a pre-installed sixty-four-bit operating system, then you need to select the WinNTSetup_64.exe file and open it.

The main utility window will open on a new page.

At this stage, you should visit the disk management section of your computer device.

The disks will appear in a new window. Among them will be the one on which the user wants to install a new operating system.

Before installing Windows 10, you must first create a partition with the required volume. It can be set at 350 megabytes.

After creating a new partition, you need to right-click on it and select Make Partition Active from the list of commands.

In the place where there is allocated space, the Windows 10 operating system will be installed.

Working with WinNTSetup

On the main page of the utility, you need to find the line Path to Windows installation files and click on Select.

From the list in the new window, select the install.wim file. Then click on Open.

In the WinNTSetup utility window, you need to select the disk on which the Windows 10 boot file will be installed.

On the new page you need to select the created disk and click on Select folder.

Then you should select the drive where Windows 10 will be installed.

You need to select the appropriate drive.

In the new window you need to click on Ok.

The program will begin to automatically unpack the Windows file.

At this stage, the installation of the operating system can be considered complete. The computer device will reboot.

When booting a computer device, you must enter through the BIOS and select a priority for starting the hard drive.

After this, the final stage of installation of the new operating system will begin.

In the window where you need to enter the key, click on Do later.

On the page that appears, select Skip this step.

You can create a local account to complete the operating system installation process.

Windows 10 will subsequently be loaded.

In the Disk Management section, information will appear that our operating system can function absolutely normally.

Cool

Tags:

Not many users know how to properly use the WinNTSetup program. It is useful and can be used even for installing any Windows operating system. Programs 4.81 14

Vladimir

The article talks about what installation is, why this process is needed, and describes the installation of games and software.

Digital Age

Nowadays, computers are becoming increasingly widespread, many can no longer imagine life without them, and almost all enterprises have switched to electronic document management. But just 15 years ago, not everyone could boast of having a home PC, or high-speed unlimited Internet access. And the development of new software has become a profitable business for many, bringing in billions. If you look at the statistics of in-demand professions on the labor market, more and more programmers and other similar specialists are required every year.

And this is natural, because even the most powerful and modern computer without software is nothing more than a set of expensive chips. Operating systems and programs are a kind of layer between man and machine, which serve for their interaction. But for the programs to work, you must first install them, since you cannot simply transfer a set of files to your computer and expect everything to work by itself; this is why they need to be installed correctly. So what is installation? What is it like and what is it needed for? We'll figure this out.

Installation

Before answering this question, it's worth diving a little deeper into how programs work. In its pure form, any of them is a set of sequences of ones and zeros that the processor of a computer or other device interprets into certain commands. But such programs were common a long time ago, when PCs did not have a graphical interface and were “fed” programs directly.

But now, if you look at almost any software, then in addition to the interface, you will notice a lot of other things: additional fonts, language packs, help files, online checking for updates and much more. All this is hidden in special system libraries, and they need to be copied correctly. True, the installation can be different, but first things first. So what is installation?

Definition

Almost all programs are delivered in compressed or packaged form, which is natural, because it is much easier to download one installation archive and get everything you need from it than to download or copy dozens, or even hundreds of different files. For example, just look at the catalog of any software to ask the question: “What is an installation?”

Installation is a copying process to the end user's computer. It cannot be called a regular copying to a file system, since during the installation process a special program (package manager) checks the computer for compatibility, the presence of the necessary accompanying software, etc.

Then the installer places files on the disk in the required sequence, creates additional directories if they are needed, makes entries in the registry, startup, associates files, etc. So now we know what installing a program is.

As you can see, during this process the computer performs many actions, although the user, most often, does not notice any of this. It is also worth noting that we will use this term in relation to plug-ins and drivers, although they themselves are not programs.

Kinds

There are also several basic installation types. And although they do the same job, their methods are slightly different. And when examining the question of what software installation is, it is worth mentioning the most common ones.

For example, a “silent” installation is performed without displaying pop-ups and other things. The user starts the process and after some time simply receives a program ready to use.

Automatic installation (the most common) occurs without human intervention, of course, except for the launch itself and some settings, for example, instructions on where to unpack the software, whether to create a shortcut to launch, etc.

Manual installation is different in that it requires many complex steps.

There are also some that are not required, and the entire installation consists only in the fact that they simply copy the files to the hard drive on their own. So now we know what installing a program is.

Games

Computer games have long ceased to be some kind of childish or primitive entertainment. This is a profitable business, and many large companies spend tens or even hundreds of millions on creating the next toy that brings in profits several times more.

So what is a game installation? Essentially, this is the same as installing another program. During this process, game materials (models, sound, textures, etc.) and executable files are copied to the hard drive, which assemble it all into a three-dimensional controlled image.